LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair >> Keyless Beeper Removal/installation[With Advanced Keyless System]
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Keyless Beeper Removal/installation[With Advanced Keyless System]

KEYLESS BEEPER REMOVAL/INSTALLATION [WITH ADVANCED KEYLESS SYSTEM]

1. Disconnect the negative battery cable.
2. Remove the rear bumper.
3. Remove the nuts.




4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals