LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MX-5 Miata L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing - Dynamic Stability Control >> Active Command Modes Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Active Command Modes Procedure

Active Command Modes Procedure





1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector.
2. Turn the ignition switch to the ON position (engine off) or start the engine.
3. Activate active command modes using WDS or equivalent.
scientia non olet · About LEMON Manuals