LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> Combined Sensor Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Combined Sensor Removal/Installation

CAUTION:
  • The internal parts of the combined sensor could be damaged if dropped. Be careful not to drop the combined sensor. Replace the combined sensor if it is subjected to an impact. Also, do not use an impact wrench or other similar air tools when removing/installing the sensor.
  1. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in Fig 1 .
    Fig 1: Combined Sensor With Torque Specifications
    G04318443Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
  4. After installation, perform the combined sensor initialization procedure. (See COMBINED SENSOR INITIALIZATION PROCEDURE  .)
scientia non olet · About LEMON Manuals