LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> MPV LX-SV >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System (AJ)] >> On-Board Diagnostic Test >> Freeze Frame PID Data Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Freeze Frame PID Data Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Record the FREEZE FRAME PID DATA by WDS or equivalent.
Fig 1: Locating DLC-2 Connector
G04328323Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals