LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Spring Lock Couplings >> Disconnect
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Spring Lock Couplings: Disconnect

  1. Relieve the fuel pressure. See FUEL PRESSURE RELIEF  .
  2. Remove the fuel tube clip.
    Fig 1: Removing Fuel Tube Clip
    G04308098Courtesy of MAZDA MOTORS CORP.
  3. Install the appropriate disconnect tool SST  .
    Fig 2: Installing Disconnect Tool SST
    G04308099Courtesy of MAZDA MOTORS CORP.
  4. Close and push disconnect tool SST  into the open side of the cage.
    Fig 3: Pushing Disconnect Tool SST Into Open Side Of Cage
    G04308100Courtesy of MAZDA MOTORS CORP.
  5. Separate the fitting.
    Fig 4: Separating Fitting
    G04308101Courtesy of MAZDA MOTORS CORP.
  6. Remove disconnect tool SST.
Fig 5: Removing Disconnect Tool SST
G04308102Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals