LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 L4-2.3L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> DSC HU/CM Configuration
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DSC HU/CM Configuration

DSC HU/CM CONFIGURATION





1. Connect the WDS or equivalent to the DLC-2.
2. Input vehicle information following the directions on the WDS or equivalent screen
3. Select "MODULE PROGRAMMING".
4. Select "PROGRAMMABLE MODULE INSTALLATION".
5. Select "ABS/TCS"
6. Retrieve DTCs using the WDS or equivalent then verify that there is no DTC present
^ If any DTC is present, perform applicable DTC inspection
scientia non olet · About LEMON Manuals