LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 L4-2.3L >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Tests and General Diagnostics

BCM SELF-TEST




1. Connect the WDS or equivalent to the DLC-2.
2. Set up the WDS or equivalent (including the vehicle recognition).
3. Verify the following vehicle conditions:
- Ignition switch is at ON position.
- All the switches are turned off (except the ignition switch).
- All the doors, hood, trunk lid, and liftgate are closed.
- All the doors, and liftgate are unlocked.
- Parking brake lever is pulled.
- Hazard warning switch is turned to off.
- Turn switch is turned to off.
- Rear wiper switch is turned to off.
- Door lock switch is not pressed.

4. Perform procedures according to directions on the WDS or equivalent screen.
5. Verify if any DTCs are displayed.
- If any DTCs are displayed, perform the troubleshooting according to the corresponding DTC inspection.

6. Disconnect the WDS or equivalent.
scientia non olet · About LEMON Manuals