October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
- If it can be verified, perform the Circuit Open/Short Inspection .
- If it cannot be verified, replace the neutral switch.
  
  Fig 1: Identifying Neutral Switch
  Courtesy of MAZDA MOTORS CORP.

MEASURED CONDITION AND CONTINUITY

Measured condition	Continuity
Rod pushed	Continuity detected
Except above	No continuity