LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute i, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Throttle Position (TP) Sensor - 3.0L (4V) >> Removal and Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal and Installation

  1. Disconnect the negative battery cable. See BATTERY DISCONNECT .
  2. Disconnect the electrical connector.
  3. Remove the TP sensor screws.
  4. Remove the TP sensor
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals