LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> Tribute 2WD L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor: Service and Repair

KNOCK SENSOR (KS)

Removal and Installation
1. Disconnect the negative battery cable. See BATTERY DISCONNECT.
2. Raise and support the vehicle. See LIFTING.

NOTE: The knock sensor (KS) is located on the RH side of the cylinder block.




3. Disconnect the KS electrical connector and remove the connector from the mounting bracket.
4. Remove the bolt and the KS.
5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals