LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> RX-8 Shinka, 1.3 N >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System 13BMSP] >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pending Trouble Code Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Retrieve the pending trouble codes using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector
    G03701645Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals