October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Variable Tumble Control System (VTCS) Operation inspection: Notes
- Connect the WDS or equivalent to the DLC-2.
- Access ECT PID.
- Verify ECT PID is 65 °C {149 °F} or less.
- Start the engine.
- Verify that the rod of VTCS shutter valve actuator is pulled.
Courtesy of MAZDA MOTORS CORP.
- If the rod is not pulled, inspect the following.
- VTCS shutter valve actuator
- VTCS check valve (one-way)
- Vacuum hose
- VTCS solenoid valve
- Wiring harness and connectors (Main relay - VTCS solenoid valve - PCM terminal 2N)
- Access RPM PID.
- Inspect the rod operation under the following condition.
- If the rod operation is not as specified, inspect the following:
- VTCS shutter valve actuator
- Delay valve
- Vacuum chamber
- Vacuum hose
- VTCS solenoid valve
- Wiring harness and connectors (Main relay - VTCS solenoid valve - PCM terminal 2N)