LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MX-5 Miata L4-1.8L DOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Plate Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Plate Removal/Installation

PLATE REMOVAL/INSTALLATION




1. Remove the drive belt.
2. Remove the crankshaft pulley.
3. Remove the plate.
4. Install in the reverse order of removal.

NOTE: Adjust the drive belt when installing the drive belt. (See DRIVE BELT ADJUSTMENT.)
scientia non olet · About LEMON Manuals