LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MPV LX-SV >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection [Standard Deployment Control System] >> Driver's Seat
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver's Seat

  1. Disconnect the buckle switch connector.
  2. Inspect for continuity between the buckle switch terminals using an ohmmeter.
    • If not as specified, replace the front buckle.
    Fig 1: Inspecting Buckle Switch Continuity (Standard Deployment Control System) (1 Of 2)
    G03700958Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Buckle Switch Continuity (Standard Deployment Control System) (2 Of 2)
    G03700959Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals