LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Shift-Lock Solenoid (Built-In Selector Lever) Inspection >> Continuity Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the connector.
  4. Inspect the continuity.
  5. Connect the connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
    Fig 1: Identifying Shift-Lock Solenoid Side Connector
    G03700613Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals