LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> B4000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Camshaft Position (CMP) Sensor Removal/Installation - 4.0L >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Remove the camshaft position (CMP) sensor.
    1. Disconnect the electrical connector.
    2. Remove the bolt.
    3. Remove the sensor.
    Fig 1: Removing CMP Sensor
    G03729305Courtesy of MAZDA MOTORS CORP.
  2. To install, reverse the removal procedure.
    Fig 2: Installing CMP Sensor - With Torque Specification
    G03729306Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals