LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> B4000 Base, Automatic >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Ignition Key Release Button Removal/Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Key Release Button Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the ignition switch lock cylinder; See IGNITION LOCK CYLINDER REMOVAL/INSTALLATION .
  3. If equipped, remove the tilt wheel handle.
    Fig 1: Removing Tilt Wheel Handle
    G03730469Courtesy of MAZDA MOTORS CORP.
  4. Remove the upper and lower steering column shrouds.
    1. Remove screws.
    2. Remove shrouds.
      Fig 2: Removing Upper And Lower Steering Column Shrouds
      G03730470Courtesy of MAZDA MOTORS CORP.
  5. Remove the key release lever bolt (1), lever (2) and spring (3).
    Fig 3: Removing Key Release Lever Bolt, Lever And Spring - With Torque Specification
    G03730471Courtesy of MAZDA MOTORS CORP.
  6. Install in reverse order of removal.
scientia non olet · About LEMON Manuals