Component Testing Procedure
COMPONENTS TESTING PROCEDURE
| TO TEST | Connect Self-Powered Test Light or Ohmmeter to Terminals | Move Switch to These Positions | A Good Switch Will Indicate |
|---|---|---|---|
| Starter Relay Circuit | B4 (Y) and STA (R/LB) | Acc, Lock, Off, Run, Start | Closed Circuit in START position |
| B4 (Y) and A4 (GY/Y) | Acc, Lock, Off, Run, Start | Closed Circuit in RUN position | |
| Ignition Circuit | B5 (Y) and 11 (LG/V) | Acc, Lock, Off, Run, Start | Closed Circuit in START or RUN position only |
| "Acc" Circuit | B5 (Y), B1 (Y) and A1 (B/LG) | Acc, Lock, Off, Run, Start | Closed Circuit in RUN and ACC positions only |
| Bulb-Test Circuit | Either P1 (T/LG) and GND (B) | Acc, Lock, Off, Run, Start | Closed Circuit in START position only |