LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> B4000 Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Pulse Damper - 2.3L Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Pulse Damper - 2.3L Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the intake manifold. See INTAKE MANIFOLD REMOVAL/INSTALLATION - 2.3L
  3. Disconnect the vacuum hose at the fuel pulse damper.
    Fig 1: Disconnecting Vacuum Hose From Fuel Pulse Damper
    G03729113Courtesy of MAZDA MOTORS CORP.
  4. Remove the fuel pulse damper.
    • Remove the retaining clip.
    • Remove the fuel pulse damper.
      Fig 2: Removing Fuel Pulse Damper
      G03729114Courtesy of MAZDA MOTORS CORP.
  5. To install, reverse the removal procedure.
    • Lubricate the O-rings with clean engine oil.
scientia non olet · About LEMON Manuals