LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 6 i, 4D Sedan, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System (L3) >> After Repair Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

After Repair Procedure

  1. Connect WDS or equivalent.
  2. Cycle the ignition switch from OFF to ON.
  3. Record DTC if retrieved.
  4. Clear all diagnostic data by WDS or equivalent.
    Fig 1: Locating DLC-2 16-Pin Connector
    G03643421Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals