LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 6 i, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting (Engine Control System L3) >> Engine Control System Operation Inspection >> Fuel Injector Operation Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Injector Operation Inspection

FUEL INJECTOR OPERATION INSPECTION

STEP INSPECTION RESULTS ACTION
1 While cranking engine, inspect for fuel injector operation sound at each cylinder using a soundscope.
Is operation sound heard?		 Yes Fuel injector operation is okay.
No Not heard in any cylinders: 
Go to the next step.
Heard in some cylinders: 
Go to Step 3.
2 Perform main relay operation inspection.
Is main relay operation normal?		 Yes Inspect the following:
  • Fuel injector power system related wiring harness and connectors
  • PCM connectors
  • Fuel injector GND and related wiring harness and connectors
No Repair or replace malfunctioning parts.
3 Change fuel injector connector of not operating fuel injector and operating fuel injector.
Is operation sound heard?		 Yes Go to the next step.
No Replace fuel injector.
4 Are wiring harness and connectors of not operation fuel injector normal? (Open or short circuit) Yes Inspect PCM terminal voltage of fuel injector signal.
No Repair or replace malfunctioning parts.
scientia non olet · About LEMON Manuals