LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 477 (Glass/Windows/Mirrors) >> Power Outer Mirror Switch Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Outer Mirror Switch Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disengage clips using a tape-wrapped flathead screwdriver.
  3. Remove the switch panel from the front door trim keeping the tab from catching.
  4. Disconnect the power window main switch connector and power outer mirror switch connector.
    Fig 1: Identifying Switch Panel
    G03703098Courtesy of MAZDA MOTORS CORP.
  5. Remove the screws and the power outer mirror switch.
  6. Install in the reverse order of removal.
    Fig 2: Identifying Power Outer Mirror Switch And Screw
    G03703099Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals