LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 i, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> On-Board Diagnostic Test >> Freeze Frame PID Data Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Freeze Frame PID Data Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
    Fig 1: Locating DLC-2 16-Pin Connector
    G03635621Courtesy of MAZDA MOTORS CORP.
  3. Record the freeze frame PID data using the WDS or equivalent.
scientia non olet · About LEMON Manuals