LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 L4-2.0L >> Repair and Diagnosis >> Service and Repair >> Electrical Troubleshooting Tools
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Electrical Troubleshooting Tools

Electrical Troubleshooting Tools

Jumper wire

CAUTION: Do not connect a Jumper wire from the power source line to a body ground. This may cause burning or other damage to wiring harnesses or electronic components.




- A jumper wire is used to create a temporary circuit. Connect the jumper wire between the terminals of a circuit to bypass a switch.

Voltmeter




- The DC voltmeter is used to measure circuit voltage. A voltmeter with a range of 15 V or more is used by connecting the positive (+) probe (red lead wire) to the point where voltage will be measured and the negative (-) probe (black lead wire) to a body ground.

Ohmmeter

CAUTION: Do not connect the ohmmeter to any circuit where voltage is applied. This will damage the ohmmeter.




- The ohmmeter is used to measure the resistance between two points in a circuit and to inspect for continuity and short circuits.
scientia non olet · About LEMON Manuals