LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2005 >> 3 L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Oscilloscope Patterns and Waveforms
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oscilloscope Patterns and Waveforms

INSPECTION USING AN OSCILLOSCOPE (REFERENCE)




Shift Solenoid A signal
PCM Terminals
- 1B (+) - Negative battery terminal (-)

Oscilloscope setting
- 5 V/DIV (Y), 5 ms/DIV (X), DC range

Vehicle condition
- 4GR




Shift solenoid B signal
PCM terminals
- 1C (+) - Negative battery terminal (-)

Oscilloscope setting
- 5 V/DIV (Y), 5 ms/DIV (X), DC range

Vehicle condition
- 1GR




Shift solenoid C signal
PCM terminals
- 1 D (+) - Negative battery terminal (-)

Oscilloscope setting
- 5 V/DIV (Y), 5 ms/DIV (X), DC range

Vehicle condition
- 1GR or 2GR




Pressure control solenoid (+) signal
PCM terminals
- 1G (+) - Negative battery terminal (-)

Oscilloscope setting
- 5 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- All of the following conditions are met.
- Ignition switch is turned to the ON position. (engine off)
- P or N position
- CTP




Pressure control solenoid (-) signal
PCM terminals
- 1 H (+) - Negative battery terminal (-)

Oscilloscope setting
- 200 mV/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- All of the following conditions are met.
- Ignition switch is turned to the ON position. (engine off)
- P or N position
- CTP




Vehicle speed signal (ATX)
PCM terminals
- 1J (+) - Negative battery terminal (-)

Oscilloscope setting
- 1 V/DIV (Y), 2.5 ms/DIV (X), DC range

Vehicle condition
- Vehicle speed is 32 km/h {20 mph}




Vehicle speed signal (MTX)
PCM terminals
- 1J(+) - 1N(-)

Oscilloscope setting
- 1 V/DIV (Y), 10 ms/DIV (X), DC range

Vehicle condition
- Vehicle speed is 10 km/h {6.2 mph}




Input/turbine speed sensor (+) signal
PCM terminals
- 1 M (+) - Negative battery terminal (-)

Oscilloscope setting
- 500 mV/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm-up




Input/turbine speed sensor (-) signal
PCM terminals
- 1Q (+) - Negative battery terminal (-)

Oscilloscope setting
- 500 mV/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm-up




Cooling fan control signals
PCM terminals
- 1W(+) - 1AA(-)

Oscilloscope setting
- 5 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 700 rpm, A/C ON)




APP signal
Accelerator pedal is released




Accelerator pedal is depressed
PCM terminals
- 1AL(+) - 2AA(-)

Oscilloscope setting
- 2.5 V/DIV (Y), 2 ms/DIV (X), DC range

Vehicle condition
- Ignition switch is turned to the ON position. (engine off)




HO2S (front) heater control signal (California emission regulation applicable model)
PCM terminals
- 2G(+) - 2AA(-)

Oscilloscope setting
- 5 V/DIV (Y), 50 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




HO2S (front) heater control signal (except for California emission regulation applicable model)
PCM terminals
- 2G(+) - 2AA(-)

Oscilloscope setting
- 5 V/DIV (Y), 125 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




CMP sensor signal

(+)

PCM terminals
- 2U(+) - 2AA(-)

Oscilloscope setting
- 1 V/DIV (Y), 25 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)

(-)




PCM terminals
- 2V(+) - 2AA(-)

Oscilloscope setting
- 1 V/DIV (Y), 25 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




CKP sensor signal

(+)
PCM terminals
- 2Y(+) - 2AA(-)

Oscilloscope setting
- 2 V/DIV (Y), 10 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)

(-)




PCM terminals
- 2Z(+) - 2AA(-)

Oscilloscope setting
- 2 V/DIV (Y), 10 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




OCV signal
PCM terminals
- 2AF(+) - 2AA(-)

Oscilloscope setting
- 2.5 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




HO2S (front) signal (except for California emission regulation applicable model)
PCM terminals
- 2AG(+) - 2AA(-)

Oscilloscope setting
- 0.2 V/DIV (Y), 500 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




Generator output voltage signal
PCM terminals
- 2AM (+) - 2AA (-)

Oscilloscope setting
- 2 V/DIV (Y), 2.5 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




Purge control signal
PCM terminals
- 2AN (+) - Negative battery terminal (-)

Oscilloscope setting
- 2 V/DIV (Y), 0.1 s/DIV (X), DC range

Vehicle condition
- Idle after warm-up




Generator field coil control signal
PCM terminals
- 2AQ(+) - 2AA(-)

Oscilloscope setting
- 0.5 V/DIV (Y), 1 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




Fuel injection control
PCM terminals (California emission regulation applicable model)
- Fuel injection No.1: 2AW(+) - 1 AZ(-)
- Fuel injection No.2: 2AS(+) - 1 AZ(-)
- Fuel injection No.3: 2AX(+) - 1 AZ(-)
- Fuel injection No.4: 2AT(+) - 1 AZ(-)

PCM terminals (except for California emission regulation applicable model)
- Fuel injection No.1: 2BB(+) - 1 AZ(-)
- Fuel injection No.2: 2BC(+) - 1AZ(-)
- Fuel injection No.3: 2BD(+) - 1AZ(-)
- Fuel injection No.4: 2AZ(+) - 1AZ(-)

Oscilloscope setting
- 10 V/DIV (Y), 25 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)




IGT1, IGT2, IG3, IG4 control signals

PCM terminals (California emission regulation applicable model)
- IGT1 (No.1):2BE(+) - 1BC(-)
- IGT2(No.2):2BF(+) - 1BB(-)
- IGT3(No.3):2BG(+) - 1BB(-)
- IGT4(No.4):2BH(+) - 1BC(-)

PCM terminals (except for California emission regulation applicable model)
- IGT1 (No.1):2BE(+) - 1BG(-)
- IGT2(No.2):2BF(+) - 1BC(-)
- IGT3(No.3):2BG(+) - 1BC(-)
- IGT4(No.4):2BH(+) - 1BG(-)

Oscilloscope setting
- 10 V/DIV (Y), 25 ms/DIV (X), DC range

Vehicle condition
- Idle after warm up (engine speed approx. 650 rpm, no load)
scientia non olet · About LEMON Manuals