LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> Tribute ES, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> Camshaft Position (CMP) Sensor - 2.0L ZETEC >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Remove the air cleaner outlet pipe. Refer to AIR CLEANER OUTLET PIPE -- 2.0L ZETEC .
  2. Remove the exhaust gas recirculation (EGR) tube bracket bolts
    Fig 1: Identifying Exhaust Gas Recirculation (EGR) Tube Bracket Bolts
    G00984934Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolts and position the EGR aside.
    Fig 2: Identifying EGR Bolts
    G00984935Courtesy of MAZDA MOTORS CORP.
  4. Remove bracket bolts.
    Fig 3: Identifying Bracket Bolts
    G00984936Courtesy of MAZDA MOTORS CORP.
  5. Remove the camshaft position (CMP) sensor.
    1. Disconnect the electrical connector.
    2. Remove the bolt.
    3. Remove the sensor.
    6. Fig 4: Identifying CMP Sensor Electrical Connector, Bolt & Sensor (2.0L)
    G00984937Courtesy of MAZDA MOTORS CORP.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals