October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Disconnect the throttle position (TP) sensor electrical connector.
Courtesy of MAZDA MOTORS CORP.
- Remove the two screws and the TP sensor.
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- Be sure to hand start the TP sensor screws. These are self-threading screws. Failure to hand start them can cause damage to the throttle body.
- To install, reverse the removal procedure.