October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal & Installation
- Raise and support the vehicle. Refer to
LIFTING
.
NOTE:
- The knock sensor (KS) is located on the RH side of the cylinder block.
- Disconnect the KS electrical connector and remove the connector from the mounting bracket.
Courtesy of MAZDA MOTORS CORP.
- Remove the nut and the KS.
Courtesy of MAZDA MOTORS CORP.
- To install, reverse the removal procedure.