LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> Tribute DX, 4WD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Power Systems >> Ignition Switch >> Removal and Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

  1. Disconnect the battery ground cable. Refer to BATTERY DISCONNECT .
    Fig 1: Removing Upper Steering Column Shroud
    G00987183Courtesy of MAZDA MOTORS CORP.
  2. Remove the upper steering column shroud.
    Fig 2: Removing Lower Steering Column Shroud
    G00987184Courtesy of MAZDA MOTORS CORP.
  3. Remove the lower steering column shroud.
    1. Remove the screws.
    2. Remove the lower steering column shroud.
    Fig 3: Disconnecting Ignition Switch Electrical Connector
    G00987185Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the ignition switch electrical connector.
    Fig 4: Removing Ignition Switch
    G00987186Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Lower steering column to lowest tilt position.
  5. Remove the ignition switch.
    1. Depress the two tabs.
    2. Remove the ignition switch.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals