LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Connector Installation Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Connector Installation Note

  1. After connecting the connector, rotate the lock lever in the direction of the arrow to install the DSC HU/CM connector.
    Fig 1: Locating Lock Lever Installing Direction
    G01345008Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals