LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Rear Heated Oxygen Sensor (Ho2S) Removal/Installation >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Rear Heated Oxygen Sensor (Ho2S) Removal/Installation: Notes

  1. Remove the rear HO2S connector.
  2. Remove in the order indicated in the table.
    Fig 1: Rear Heated Oxygen Sensor With Torque Specifications
    G03702087Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals