LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Connector Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connector Installation Note

  1. After connecting the connector, rotate the lock lever in the direction of the arrow to install the DSC HU/CM connector.
    Fig 1: Locating Lock Lever Installing Direction
    G01345008Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals