LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Glass/Windows/Mirrors >> Delayed Power Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Delayed Power Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the delayed power control module connector.
    Fig 1: Removing/Installing Delayed Power Control Module
    G01344326Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolt and then remove the delayed power control module.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals