LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Flasher Control Module Removal/Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Flasher Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connector.
  3. Remove the screw and then remove the flasher control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Flasher Control Module
    G01344582Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals