LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> On-Board Diagnostic Test >> PID/DATA Monitor and Record Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PID/DATA Monitor and Record Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access and monitor the PIDs using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector Location
    G00974366Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals