LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Monitors, Trips, Drive Cycles and Readiness Codes >> On-Board System Readiness Tests Access Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

On-Board System Readiness Tests Access Procedure

ON-BOARD SYSTEM READINESS TESTS ACCESS PROCEDURE

1. Perform the necessary vehicle preparation and visual inspection.




2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
3. Monitor the OBD-II systems operating status using the WDS or equivalent.
scientia non olet · About LEMON Manuals