LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute ES, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (Seats) >> Front Seat Removal/Installation >> Side Air Bag Module Connector Installation Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Side Air Bag Module Connector Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Be sure to pass the side air bag module connector (vehicle-side harness connector) under the slide connecting wire before connecting it to the harness connector of the side air bag module.
  2. After connecting the connectors, secure them to the seat cushion frame.
    Fig 1: Installing Side Air Bag Module Connector
    G01915115Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals