Resistor Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the glove compartment.
Disconnect the resistor connector.
Verify that the resistance between the terminals of the resistor is as indicated in the illustration.

Fig 1: Identifying Resistor Connector Terminals
Courtesy of MAZDA MOTORS CORP.

Fig 2: Resistor Resistance Specifications
Courtesy of MAZDA MOTORS CORP.
- If not as specified, replace the resistor.