LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute ES, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Controls [Removal & Installation] >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation (Mazda6)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal & Installation (Mazda6)

  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the illustration. On 2.3L models, see Fig 1. On 3.0L models, see Fig 2.
  3. To install, reverse removal procedure.
    NOTE: When replacing the PCM, setup the WDS tester and perform PCM configuration. See POWERTRAIN CONTROL MODULE CONFIGURATION (MAZDA6)  POWERTRAIN CONTROL MODULE PROGRAMMING.
Fig 1: Removing & Installing PCM - Mazda6 (2.3L)
G00256195Courtesy of MAZDA MOTORS CORP.
Fig 2: Removing & Installing PCM - Mazda6 (3.0L)
G00256226Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals