LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute 2WD L4-2.0L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Switch: Service and Repair

Removal and Installation

1. Disconnect the battery group and cable. Refer to BATTERY DISCONNECT.




2. Remove the upper steering column shroud.




3. Remove the lower steering column shroud.
1. Remove the screws.
2. Remove the lower steering column shroud.




4. Disconnect the ignition switch electrical connector.

NOTE: Lower steering column to lowest tilt position.




5. Remove the ignition switch.
1. Depress the two tabs.
2. Remove the ignition switch.

6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals