LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute 2WD L4-2.0L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Cruise Control Servo: Service and Repair

SPEED CONTROL ACTUATOR

REMOVAL AND INSTALLATION

1. Disconnect the battery ground cable. For additional information, refer to BATTERY DISCONNECT.




2. Release the cruise control cable cap.
1. Squeeze the cruise control cable cap retaining tab.
2. Rotate the cruise control cable cap.




3. Remove the cruise control cable.
1. Depress the spring retainer.
2. Slide the core wire end out of the cruise control servo pulley and remove the cruise control cable.




4. Remove the cruise control actuator assembly.
1. Disconnect the electrical connector.
2. Separate the wire harness from the bracket.
3. Remove the nuts.




5. Remove the bolts and separate the cruise control actuator from the bracket.
6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals