LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0090: Pressure Regulator Control Solenoid Valve Malfunction >> Detection Condition
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Detection Condition

DTC is set when PCM detects low or high input voltage from Pressure Regulator Control (PRC) solenoid valve. This is a Continuous Monitor (CM). MIL is illuminated when PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze frame data is available. DTC is not stored in PCM memory.