LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Wheel Alignment >> Maximum Steering Angle Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Maximum Steering Angle Adjustment

  1. Loosen the tie-rod end locknuts.
  2. Remove the steering gear boot clamp.
  3. Turn the left and right tie rods to equalize the length L.

    Maximum left/right difference 3 mm (0.12 in) 

    NOTE:
    • Turn the tie rods equally.
  4. Turn the tie rod to provide the correct maximum steering angle.
  5. Tighten the tie-rod end locknuts.
    Fig 1: Loosening The Tie-Rod End Locknuts
    G01913888Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    68.7-98.0 N.m (50.7-72.3 ft.lbf) 

  6. Verify that the boot is not twisted, and install the boot clamp.
  7. Adjust the toe-in after adjusting the steering angle.
scientia non olet · About LEMON Manuals