LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Child Restraint Seat Anchor Removal/Installation >> Tether Anchor >> 5HB
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Tether Anchor: 5HB

  1. Remove the trunk end trim.
  2. Remove the bolt, then child restraint seat anchor.
  3. Install in the reverse order of removal.
    Fig 1: Removing Bolt And Child Restraint Seat Anchor (5HB)
    G01914886Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals