October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Detection Condition

DTC is set when PCM detects TP sensor voltage at PCM 31-pin harness connector terminal "4V" is less than 0.1 volt after engine start. PCM determines TP circuit has a malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is not available. Freeze Frame Data is available and DTC is stored in PCM memory.