LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0340: Camshaft Position Sensor Circuit - Malfunction >> Detection Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Detection Condition

DTC is set when PCM does not receive input signal from Camshaft Position (CMP) sensor while receiving input signal from Crankshaft Position (CKP) sensor and Mass Airflow (MAF) is more than 2.7 gram/sec. This is a continuous monitor. MIL is illuminated if PCM detects malfunction during first drive cycle.

scientia non olet · About LEMON Manuals