LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Engine Control Module >> Service and Repair
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Control Module: Service and Repair

PCM REMOVAL/INSTALLATION

NOTE: For replace the PCM, setup the WDS and perform the PCM configuration. (See PCM CONFIGURATION.)

1. Disconnect the negative battery cable.




2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.