LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> B4000 Base, Standard >> Repair and Diagnosis >> Suspension >> Specifications & Procedures - Wheel Alignment >> Wheel Alignment >> Toe Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Toe Adjustment

  1. Start the engine and center the steering wheel.
    Fig 1: Centering Steering Wheel
    G01923421Courtesy of MAZDA MOTORS CORP.
  2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake pedal.
  3. Check the toe settings. See WHEEL ALIGNMENT SPECIFICATIONS  .
    4. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie rod is rotated.
    Fig 2: Removing Clamps
    G01923422Courtesy of MAZDA MOTORS CORP.
  4. Remove the clamps.
  5. Loosen the nuts. Clean and lubricate the nut(s) and front wheel spindle tie rod threads.
    Fig 3: Loosening Front Wheel Spindle Tie Rod Lock Nuts
    G01923423Courtesy of MAZDA MOTORS CORP.
  6. Rotate the front wheel spindle tie rods.
  7. Tighten the nuts.
    Fig 4: Tightening Front Wheel Spindle Tie Rod Lock Nuts
    G01923424Courtesy of MAZDA MOTORS CORP.
  8. Install the clamps.
  9. Recheck the toe settings. See WHEEL ALIGNMENT SPECIFICATIONS  .
scientia non olet · About LEMON Manuals