LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> B4000 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer System - Passive Anti-Theft System >> Programming >> Pats Initiations
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Pats Initiations

NOTE: This procedure must be performed every time a PATS module is replaced. If PATS module is from another vehicle, keys must also be programmed. See KEY PROGRAMMING (WITH PROGRAMMED KEYS)  .

Install new PATS module. See PATS MODULE  under REMOVAL & INSTALLATION. With NGS tester connected to vehicle, enter function test menu. Select SECURITY ACCESS PROCEDURE. This procedure will take 10 minutes to perform. After security access procedure is completed, select PARAMETER RESET. Turn ignition switch to OFF position. Disconnect NGS tester from vehicle. Cycle first key in ignition to ON position, then cycle second key in ignition to ON position. Program additional keys as necessary. See KEY PROGRAMMING (WITH PROGRAMMED KEYS)  .

scientia non olet · About LEMON Manuals