LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV DX >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Low And Reverse Brake Disassembly >> Snap Ring Disassembly Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Snap Ring Disassembly Note

  1. Install the SSTs  in the transaxle case as shown.
    CAUTION:
    • Depress the spring retainer only enough to remove the snap ring. Overpressing will damage the assembly edges.
    Fig 1: Depress Spring Retainer Using SST
    G03186204
  2. Compress the spring and retainer.
  3. Remove the snap ring.
  4. Remove the SSTs  and remove the spring and retainer.
scientia non olet · About LEMON Manuals